Protect Your Investment, Your Data, and Your Privacy With These Theft Prevention Accessories for PDAs
Losing a PDA through theft is one of the biggest challenges owners of personal data devices face. As the prices and capabilities of these units increases, so does the market for stolen PDAs, year after year. Of course, locking the unit up in a drawer and never taking it out is about the only certain way of making sure a PDA is never stolen, but that limits the usefulness. Attaching a heavy chain and a wheel hub may help, but it won't fit in your pocket. Instead of taking these sorts of extreme measures, consider one or more theft prevention accessories for PDAs.
Permanent Markings Scare Away Thieves
If you're a little handy and have a steady hand, you can try the tried-and-true method of etching. Grab your rotary tool and lightly carve an identifier into the back of the case, like a phone number or email address. Doing this will probably void your warranty. Don't try this unless you have a steady hand and neat handwriting.
A less extreme option is a security sticker. A sticker may not seem like much of a deterrent, but what if peeling off that sticker announced that the PDA is stolen? That's the idea behind security sticker theft prevention accessories for PDA units. The self-adhesive sticker is attached to the back of the unit, and gives an 800 number to call and report the PDA. The sticker also advises them that by reporting the unit, they can avoid prosecution.
However, if the sticker is peeled off, the phrase "STOLEN PROPERTY" and the 800 number are left behind in large, very obvious lettering of indelible ink. This type of theft prevention accessories for PDA units stops theft from those who want to snatch the item while you're not looking, and turn around and sell it on the street. Few people, regardless of how dishonest they are, will buy an item that announces it has been stolen.
Tracking the PDA With GPS
The GPS functionality built into many modern PDAs is usually used for convenience for the unit's owner, but with tracking security software, it can also be a way to find a stolen PDA. This form of theft prevention accessories for PDA units consists of software that is installed on the unit and a subscription service. The software installed will be linked to the unit's built-in password protection, and will automatically broadcast an emergency signal after an incorrect password has been entered. The subscription service will then pick up the signal and start tracking the PDA, informing the authorities where to find it.
Common Sense
Probably the best theft prevention accessories for PDA units, however, is our own common sense. Don't leave it lying unattended on a table, even for a moment. If you put it down and look away, someone else will probably pick it up. Don't leave it in plain sight inside a vehicle, even a locked vehicle. Make sure you use the built-in security functions of the unit itself. A password can, at the very least, protect the information on a unit from prying eyes if it is stolen. Think about that if you keep your kids' pictures and contact information for your kids' school on the unit.
By : R James Cook
Wednesday, December 17, 2008
Cleaning Your PC Registry...
In the beginning Windows' registry consisted of two files totalling around 5mb in size. Today it consists of at least 12 files with the Software file itself being 30mb or bigger in size. As the size of the registry has exploded, so has the trash and clutter in it. It may seem like a daunting task, but cleaning the registry properly can fix system problems, speed your computer up, and make it run more efficiently.
I have spent many years developing and refining thousands of procedures to do just that. I could share these methods of hunting down the trash with you and let you find them and delete them by hand, but if you were to sit down at your computer right now and work nonstop, you would still be busy with them a week from now when the next issue of Ray's Computer Tips arrives. By then your registry would have new clutter and you would have to start all over again.
To make registry cleaning easier on everyone, I wrote a program called RegVac Registry Cleaner (http://regvac.com/regvac.htm) to perform those procedures. It has been so successful that several companies have asked me to model their registry cleaners after RegVac and even more have copied processes that first debutted in RegVac.
The first place RegVac cleans is the HKEY_CLASSES_ROOT section (the Classes Vac in RegVac does this). This section contains settings for the classes of Windows. Think of a huge box full of snakes and you will get an idea of how complicated and interwoven it is. It is so complicated that many registry cleaners bypass it or simply perform surface scans of it. RegVac uses over a hundred processes to follow each tentacle of each class deep into this area and make sure that they abide by the rules.
Next RegVac validates the entries in 22 lists with 7 different methods (the FilesList Vac does this). This is a minor part of RegVac but the bulk of most other registry cleaners even though they usually do not clean all 22 lists.
Another part of RegVac, the Software Vac, which is unique to RegVac, finds old software sections in the registry and provides a way to remove that software's entire branch. Other registry cleaners only remove a few entries in this area often leaving huge portions of the registry that do nothing but take up space and get in the way.
Even more trash can be discovered in hundreds of stashes used to store data you will never use. Most registry cleaners do not even touch these. The Stash Vac lists these stashes and lets you go through and select which ones to empty out. Please use caution when using the Stash Vac because some of the items listed there may be important. For example, one folder in the Stash Vac lists places where data for international keyboards are stored. You probably will never use the data for Bulgarian keyboards, so you can remove it, but if you live in the US you may experience problems after removing the United States 101 keyboard. The items that you can safely remove are usually obvious.
Last but not least, when cleaning the registry, you should look for broken links to files on the computer (this is what the Bad Link Vac does). If a file is referenced in the registry but it does not exist on your hard drive, that is a good indicator that something is wrong. Many programmers start out writing a registry cleaner thinking all it has to do is check for these broken links and remove them. In fact, that is all many registry cleaners do.
Even though that is all they do, they often don't do it correctly. If you check the results of such scans, you will find out that many of the broken links are really good links. I spent several months refining this part of RegVac so that as far as I know it is 100% accurate. Despite this, please realize that some software enter broken links in the registry and require them to be there in order for them to run. RegVac skips the ones it knows about, but you still need to be careful with this part of RegVac.
RegVac has six more tools that clean even more areas: the Add/Remove Editor, the System Config Utility, the OpenWith Editor, the AutoComplete Editor, the Junk Keys Editor, and Registry Backup, Pack, and Restore.
Many of you already use RegVac but if you don't, you can downloaded a free 30 day trial of RegVac at http://regvac.com/regvacz.exe. For more information about RegVac Registry Cleaner go to http://regvac.com/regvac.htm. If you like RegVac, you can purchase it for only $29.95. All future updates are free.
By : Ray Geide
I have spent many years developing and refining thousands of procedures to do just that. I could share these methods of hunting down the trash with you and let you find them and delete them by hand, but if you were to sit down at your computer right now and work nonstop, you would still be busy with them a week from now when the next issue of Ray's Computer Tips arrives. By then your registry would have new clutter and you would have to start all over again.
To make registry cleaning easier on everyone, I wrote a program called RegVac Registry Cleaner (http://regvac.com/regvac.htm) to perform those procedures. It has been so successful that several companies have asked me to model their registry cleaners after RegVac and even more have copied processes that first debutted in RegVac.
The first place RegVac cleans is the HKEY_CLASSES_ROOT section (the Classes Vac in RegVac does this). This section contains settings for the classes of Windows. Think of a huge box full of snakes and you will get an idea of how complicated and interwoven it is. It is so complicated that many registry cleaners bypass it or simply perform surface scans of it. RegVac uses over a hundred processes to follow each tentacle of each class deep into this area and make sure that they abide by the rules.
Next RegVac validates the entries in 22 lists with 7 different methods (the FilesList Vac does this). This is a minor part of RegVac but the bulk of most other registry cleaners even though they usually do not clean all 22 lists.
Another part of RegVac, the Software Vac, which is unique to RegVac, finds old software sections in the registry and provides a way to remove that software's entire branch. Other registry cleaners only remove a few entries in this area often leaving huge portions of the registry that do nothing but take up space and get in the way.
Even more trash can be discovered in hundreds of stashes used to store data you will never use. Most registry cleaners do not even touch these. The Stash Vac lists these stashes and lets you go through and select which ones to empty out. Please use caution when using the Stash Vac because some of the items listed there may be important. For example, one folder in the Stash Vac lists places where data for international keyboards are stored. You probably will never use the data for Bulgarian keyboards, so you can remove it, but if you live in the US you may experience problems after removing the United States 101 keyboard. The items that you can safely remove are usually obvious.
Last but not least, when cleaning the registry, you should look for broken links to files on the computer (this is what the Bad Link Vac does). If a file is referenced in the registry but it does not exist on your hard drive, that is a good indicator that something is wrong. Many programmers start out writing a registry cleaner thinking all it has to do is check for these broken links and remove them. In fact, that is all many registry cleaners do.
Even though that is all they do, they often don't do it correctly. If you check the results of such scans, you will find out that many of the broken links are really good links. I spent several months refining this part of RegVac so that as far as I know it is 100% accurate. Despite this, please realize that some software enter broken links in the registry and require them to be there in order for them to run. RegVac skips the ones it knows about, but you still need to be careful with this part of RegVac.
RegVac has six more tools that clean even more areas: the Add/Remove Editor, the System Config Utility, the OpenWith Editor, the AutoComplete Editor, the Junk Keys Editor, and Registry Backup, Pack, and Restore.
Many of you already use RegVac but if you don't, you can downloaded a free 30 day trial of RegVac at http://regvac.com/regvacz.exe. For more information about RegVac Registry Cleaner go to http://regvac.com/regvac.htm. If you like RegVac, you can purchase it for only $29.95. All future updates are free.
By : Ray Geide
Friday, December 12, 2008
IPOD Accessories...
The popularity of Apple's iPod has spawned a huge industry of iPod accessories. There is such a wide variety to choose from, it can be hard to decide which ones are important to look at and which ones are pointless fluff. Here's a look at the five iPod classic accessories that every iPod owner needs to consider.
Case
The first iPod classic accessory that every owner should purchase is a protective case. A case is especially important if you travel with your iPod, and if you shove it in your pocket or purse with your keys you're just asking for trouble without a case. The finish of the iPod classic is especially vulnerable to the dings and dents of everyday life. A protective case will keep your iPod looking pristine, and helps keep dust and dirt away from the vulnerable electronics inside.
Screen Protector
Almost as important as a case is a screen protector. Most cases do not cover the screen, because users want to be able to see the screen without taking it out of the case. A screen protector will protect the screen, which is even more vulnerable to scratches than the metal body. And a scratch across the screen is even more annoying than a scratch across the body, because you'll be looking right at it every time you look at the screen. Like the case, if you move your iPod classic around a lot, a screen protector is a valuable iPod classic accessory that will keep your iPod looking good.
Charger
An iPod with a dead battery is basically a paperweight. An extra charger or two is an iPod classic accessory worth having, both for convenience and to reduce the chance of running out of juice. Having an extra charger means you can charge your iPod at home and in the office, and you won't run out of power in the middle of the day. If you spend a lot of time in the car and listen to your iPod while driving (through speakers or an iTrip, please don't use headphones while driving), a car charger that plugs into the lighter jack will ensure that you have music the whole way.
Cables
Cables are another necessary iPod classic accessory. With just about every computer peripheral now using a USB connection, free USB ports may be at a premium on your computer. Fear not, because you can get a cable that lets you connect your iPod to your computer's FireWire port instead. Also, if you have iTunes installed on your computer at the office as well as your home computer, an extra sync cable will save you from having to transport the cable back and forth. There are also cables available that let you connect your iPod to your home stereo.
Speakers
Speakers are one of the most popular iPod classic accessories, and therefore come in a wide variety. Most speakers plug into the headphone jack, and are either battery powered or plugged into a wall outlet. There are also speakers that the iPod classic can dock with, which will have the added benefit of charging the unit while it's playing. Many of these speaker docking stations come with a remote, so you can skip songs and adjust the volume without going over to the unit. Speakers will generally give better sound than headphones, and will allow you to share your music with everyone in the room. If you're looking for portability, go with the battery-powered speakers. Otherwise, AC-powered speakers will sound better and can have the added functionality of being a docking station.
The wide variety of iPod classic accessories available can be overwhelming. Now, you've been given the information that should help you to decide on what accessories you need, and what ones you can avoid.
Author : R James Cook (http://www.BlingiPod.com)
Case
The first iPod classic accessory that every owner should purchase is a protective case. A case is especially important if you travel with your iPod, and if you shove it in your pocket or purse with your keys you're just asking for trouble without a case. The finish of the iPod classic is especially vulnerable to the dings and dents of everyday life. A protective case will keep your iPod looking pristine, and helps keep dust and dirt away from the vulnerable electronics inside.
Screen Protector
Almost as important as a case is a screen protector. Most cases do not cover the screen, because users want to be able to see the screen without taking it out of the case. A screen protector will protect the screen, which is even more vulnerable to scratches than the metal body. And a scratch across the screen is even more annoying than a scratch across the body, because you'll be looking right at it every time you look at the screen. Like the case, if you move your iPod classic around a lot, a screen protector is a valuable iPod classic accessory that will keep your iPod looking good.
Charger
An iPod with a dead battery is basically a paperweight. An extra charger or two is an iPod classic accessory worth having, both for convenience and to reduce the chance of running out of juice. Having an extra charger means you can charge your iPod at home and in the office, and you won't run out of power in the middle of the day. If you spend a lot of time in the car and listen to your iPod while driving (through speakers or an iTrip, please don't use headphones while driving), a car charger that plugs into the lighter jack will ensure that you have music the whole way.
Cables
Cables are another necessary iPod classic accessory. With just about every computer peripheral now using a USB connection, free USB ports may be at a premium on your computer. Fear not, because you can get a cable that lets you connect your iPod to your computer's FireWire port instead. Also, if you have iTunes installed on your computer at the office as well as your home computer, an extra sync cable will save you from having to transport the cable back and forth. There are also cables available that let you connect your iPod to your home stereo.
Speakers
Speakers are one of the most popular iPod classic accessories, and therefore come in a wide variety. Most speakers plug into the headphone jack, and are either battery powered or plugged into a wall outlet. There are also speakers that the iPod classic can dock with, which will have the added benefit of charging the unit while it's playing. Many of these speaker docking stations come with a remote, so you can skip songs and adjust the volume without going over to the unit. Speakers will generally give better sound than headphones, and will allow you to share your music with everyone in the room. If you're looking for portability, go with the battery-powered speakers. Otherwise, AC-powered speakers will sound better and can have the added functionality of being a docking station.
The wide variety of iPod classic accessories available can be overwhelming. Now, you've been given the information that should help you to decide on what accessories you need, and what ones you can avoid.
Author : R James Cook (http://www.BlingiPod.com)
Coming Age of HDTV
HDTV - high-definition television: it is something that has been discussed for some time now, however not everyone has a strong sense of what it is and why he or she would want to have it.
Because all television stations will be required to broadcast a digital signal after February 17, 2009, many viewers are beginning to ask a lot more questions about how the new digital age of television will affect their personal viewing experience. They want to know whether or not their television set will be compatible, whether or not they will have to replace it, and what steps they will have to take in order to keep watching their favorite shows.
How To Identify If Your Television Is An Analog TV
Analog television has been with us since the inception of television broadcasting. Analog is the old way of processing a television signal.
Television technology took a big leap in the 1960's with the transition from television tubes to circuit boards, but that conversion failed to bring with it any major strides in the quality of the television picture.
If your current television does not have a logo on its front that indicates DTV (Digital TV), EDTV (Enhanced Definition TV), or HDTV, then your television set is an analog TV.
Understanding The Transition From An Analog Signal To The New Digital Signal
Digital image processing is a technology that began in earnest during the 1970's, when Japanese technology companies began to explore the concepts of HDTV. The Japanese TV manufacturers were exploring ways to improve the picture quality of the television image, as a way to find more customers for their television products.
While Americans were busy playing with building the computer industry, the Japanese were hard at work trying to build a better television set. The first HDTV systems developed by the Japanese still relied on the old analog system of sending a broadcast signal to their televisions, but they were still able to produce a better television viewing experience.
When initially introduced to the U.S. Government, the new HDTV system produced a myriad of concerns, which included the issue of an analog HDTV-system needing more bandwidth than what was currently allotted to the television broadcasters.
In 1993, a consortium of American researchers and manufacturers (known as The Grand Alliance) joined forces to find a way to bring HDTV-quality to the American public, while keeping the bandwidth requirements of broadcasters within the existing limits.
Researchers soon understood that they would need to push at least part of the television signal in a digital format to make sure that HDTV could be transmitted within the limits currently allotted to the television broadcasters. By the time they had finished their work, the Grand Alliance had created a system that was 100% Digital.
In 1995, after considerable opposition from the television broadcast industry, the U.S. Federal Communications Commission officially set the standard for completely digital HDTV broadcasting system. This put into motion the events that are just now coming to fruition, with the rollout of the new Digital Television broadcasting system.
Although most television stations have been broadcasting a Digital Television Signal now for a few years, analog television owners have been none the wiser. But that will all change on February 17, 2009.
Author : Lloyd Howard
Because all television stations will be required to broadcast a digital signal after February 17, 2009, many viewers are beginning to ask a lot more questions about how the new digital age of television will affect their personal viewing experience. They want to know whether or not their television set will be compatible, whether or not they will have to replace it, and what steps they will have to take in order to keep watching their favorite shows.
How To Identify If Your Television Is An Analog TV
Analog television has been with us since the inception of television broadcasting. Analog is the old way of processing a television signal.
Television technology took a big leap in the 1960's with the transition from television tubes to circuit boards, but that conversion failed to bring with it any major strides in the quality of the television picture.
If your current television does not have a logo on its front that indicates DTV (Digital TV), EDTV (Enhanced Definition TV), or HDTV, then your television set is an analog TV.
Understanding The Transition From An Analog Signal To The New Digital Signal
Digital image processing is a technology that began in earnest during the 1970's, when Japanese technology companies began to explore the concepts of HDTV. The Japanese TV manufacturers were exploring ways to improve the picture quality of the television image, as a way to find more customers for their television products.
While Americans were busy playing with building the computer industry, the Japanese were hard at work trying to build a better television set. The first HDTV systems developed by the Japanese still relied on the old analog system of sending a broadcast signal to their televisions, but they were still able to produce a better television viewing experience.
When initially introduced to the U.S. Government, the new HDTV system produced a myriad of concerns, which included the issue of an analog HDTV-system needing more bandwidth than what was currently allotted to the television broadcasters.
In 1993, a consortium of American researchers and manufacturers (known as The Grand Alliance) joined forces to find a way to bring HDTV-quality to the American public, while keeping the bandwidth requirements of broadcasters within the existing limits.
Researchers soon understood that they would need to push at least part of the television signal in a digital format to make sure that HDTV could be transmitted within the limits currently allotted to the television broadcasters. By the time they had finished their work, the Grand Alliance had created a system that was 100% Digital.
In 1995, after considerable opposition from the television broadcast industry, the U.S. Federal Communications Commission officially set the standard for completely digital HDTV broadcasting system. This put into motion the events that are just now coming to fruition, with the rollout of the new Digital Television broadcasting system.
Although most television stations have been broadcasting a Digital Television Signal now for a few years, analog television owners have been none the wiser. But that will all change on February 17, 2009.
Author : Lloyd Howard
Subscribe to:
Posts (Atom)
